Setting up the Oliver Cloud Printer (WiFi/BT model)

Use this guide to connect your WiFi-enabled cloud printer (ie: NT212) to Oliver.

Please follow the steps below to connect your cloud printer to Oliver POS. There are a few steps, so we’ll break it down into two parts:

Part 1/2 – Connecting the printer to the internet

  1. Turn on printer

  2. Download Sunmi Assistant from the Google/iOS app store

  3. Create an account with the Sunmi Assistant

  4. Once done, open Sunmi Assistant --> go to Device --> add device

  5. Choose the Cloud Printer thumbnail

  6. Input the serial number of the printer by Scanning the QR Code or manually typing the serial number listed at the bottom of the device.

  7. Choose the WiFi network, make sure you choose 2G Network

  8. Once WiFi is connected you should see the cloud printer in the device list. Once you can see the device in the list, that means it is now connected to the WiFi network

  9. Now that you are connected, click the device in the Sunmi assistant app, and unbind the device from the assistant. This step is important to connect to Oliver.

  10. Now you are ready to connect the device to the Oliver POS!


Part 2/2 – Connecting to Oliver POS

  1. Log into your Oliver Hub admin dashboard

  2. Go to Settings --> Locations

  3. Click on the location name and select “Cloud Printer” on the left

  4. Select “Add new” at the top right of the page

  5. Fill out the form with the name and serial number.

  6. Click submit and you are done!

Log in to your register and you will now be able to print to the cloud printer.


Resetting the printer

  1. Turn off the printer

  2. Hold the reset button on the bottom of the device for 15 seconds

  3. Keep holding the button then flip the on switch on and hold another 15 seconds

  4. Let go and turn off the device

  5. Turn the printer back and it should be ready to pair again.

Did this answer your question?
😞
😐
😁