Skip to main content
All CollectionsHardwareOliver Cloud Printer
Setting up the Oliver Cloud Printer (LAN/ethernet model)
Setting up the Oliver Cloud Printer (LAN/ethernet model)

Use this guide to connect your LAN/ethernet cloud printer (ie: NT310) to Oliver.

Jordan Thorne avatar
Written by Jordan Thorne
Updated over a week ago

Step 1 - Connecting the printer to the internet

  1. Locate the LAN port on the back of your new printer.
    Tip: The jack is the furthest one to the right, and is labelled with a symbol that looks like three squares connected by a line!

  2. Using an Ethernet cable (standard RJ45 type), connect the printer to your network by plugging it into the LAN port on the device that's connected to the internet, such as a modem, router, or modem-router combo.

  3. Verify that the printer is connected to the internet. On the top panel, the middle indicator light has a Cloud icon with a small arrow inside - this will show a blue light when your printer is online!

  4. Now you are ready to connect the device to the Oliver POS!


Step 2 - Connecting to Oliver POS

  1. Log into your Oliver Hub admin dashboard --> hub.oliverpos.com

  2. Go to Settings --> Locations

  3. Click on the location name and select “Cloud Printer” on the left (See image below)

  4. Select “Add new” at the top right of the page.

  5. Fill out the form with the name and serial number, and make sure to select 80mm as the receipt size.

  6. Click submit and you are done!

Log in to your register and you will now be able to print to the cloud printer.

Did this answer your question?